This article describes scanning agentless networks that were manually added with Network Discovery.
To scan a manually added network:
1. Click Network Discovery, on the sidebar. The Network Discovery page appears.
2. Select the relevant site. The Site's Scan page appears.
3. Open the Scan Settings (top, right-hand side of page). The Scan Settings appear.
4. Click Add network. The Add Network window appears.
5. Select the public IP and the scanning agent.
6. Select Custom.
7. Enter the custom network.
Note: Scanning custom networks may not return full device information.
8. Click Add.
That's it! The network will appear in your scanned settings.
9. Click Save and scan to begin scanning the network.
Note: The agent will scan the network now and at the selected scheduling.
To view and manage the scan results, see Network Discovery Security Scan
For more on Network Discovery, check out these articles:
- Activate Network Discovery
- Optimal network settings
- Set up scans
- Security scans
- Scan results and actions